SPECIFICATIONS


ENGINE

Description Type Capacities Part Number Global Part Number
U.S. Metric
Cooling System
♦ Engine Coolant (3.6L Engine) Mopar Engine Coolant/ Antifreeze 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) 13.7 Quarts 13 Liters 68163848AB 68163848GB
♦ Engine Coolant (5.7L Engines) Mopar Engine Coolant/ Antifreeze 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) 18.3 Quarts 17.3 Liters 68163848AB 68163848GB
Engine Oil with Filter
Engine Oil (3.6L Engines) We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of FCA Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade. Mopar SAE 5W-30 engine oil approved to Material Standard MS-6395 may be used when SAE 5W-20 engine oil meeting MS-6395 is not available. 6 Quarts 5.6 Liters 68218890AB 68218890GB
Engine Oil (5.7L Engine) We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade. 7 Quarts 6.6 Liters 68218890AB 68218890GB
Fuel Selection
Fuel Selection (3.6L Engine) 87 Octane, 0-15% Ethanol — —
Fuel Selection (3.6L Flex Fuel E-85 Engine) 87 Octane, Up To 85% Ethanol — —
Fuel Selection (5.7L Engine) 89 Octane Recommended - 87 Octane Acceptable, 0-15% Ethanol — —
Fuel Capacity (approximate)
Description U.S. Metric Part Number Global Part Number
Regular Cab Shortbed/Crew Quad Cab Models 26 Gallons 98 Liters — —
Regular Cab Longbed/Crew Quad Cab Models (Optional) 32 Gallons 121 Liters — —
A/C Refrigerant System
Engine R-134a Capacity R-1234yf Capacity Part Number Global Part Number
5.7L 539g (1.19 lb.) 510g (1.13 lb.) R-1234yf 68224028AB R-1234yf 68224028GA
3.6L 567g (1.25 lb.) 510g (1.13 lb.)
A/C Compressor Oil (3.6L/5.7L) – ND-12 68224150AB –
♦ System fill capacity includes heater and coolant recovery bottle filled to MAX level.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


SPARK PLUGS

Description Type Gap
U.S. Metric
Spark Plugs (3.6L ERB Engine) We recommend you use Mopar Spark Plugs. 0.043 in 1.10 mm
Spark Plugs (5.7L EZC; EZH Engine) We recommend you use Mopar Spark Plugs. 0.043 in 1.10 mm

TRANSMISSION

Description Type Capacities Part Number Global Part Number
U.S. Metric
Automatic
66RFE - Service Fill Mopar ATF+4 Automatic Transmission Fluid 4X2 - 5.5 Quarts 4X2 - 5.2 Liters 68218057AB 68218057GB
4X4 -6.5 Quarts 4X4 - 6.2 Liters 68218057AB 68218057GB
♦ 8HP45 Mopar ZF 8&9 Speed ATF™ Automatic Transmission Fluid 8.98 Quarts 8.5 Liters 68218925AA 68218925GA
♦ 8HP70 Mopar ZF 8&9 Speed ATF™ Automatic Transmission Fluid 8.77 Quarts 8.3 Liters 68218925AA 68218925GA
♦ Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. Refer to the appropriate service information for the correct procedures.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


TRANSFER CASE

Description Type Capacities Part Number Global Part Number
U.S. Metric
♦BW 44-44 Mopar Transfer Case Lubricant 3.0 Pints 1.4 Liters 68049954AA —
♦BW 44-45 Mopar Transfer Case Lubricant 3.0 Pints 1.4 Liters 68089195AA —
♦ Approximate dry fill or fill to bottom edge of fill plug hole.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


CHASSIS

Description Type Capacities Part Number Global Part Number
U.S. Metric
215 FD Front Axle Mopar Gear and Axle Lubricant 75W-85 2.3 Pints 1.1 Liters 05136035AD 05136035GC
C235 Rear Axle We recommend you use Mopar Synthetic Gear Lubricant SAE 75W-90 (MS-A0160). 4.64 Pints 2.2 Liters 68340460AA —
♦ C235 Rear Axle (ANTI-SPIN) We recommend you use Mopar Synthetic Gear Lubricant SAE 75W-90 (MS-A0160). 4.43 Pints 2.1 Liters 68340460AA —
Chassis Systems
Brake Master Cylinder We recommend you use Mopar DOT 3. If DOT 3 brake fluid is not available, then DOT 4 is acceptable. N/A N/A 04318080AD 04318080GC
Power Steering Reservoir We recommend you use Mopar Power Steering Fluid +4 or Mopar ATF+4 Automatic Transmission Fluid. N/A N/A 68218064AB 68218064GB
♦ Limited-Slip Rear Axles require the addition of 148 ml (5 oz.) Mopar Limited Slip Additive (MS-10111).

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.