Semi-automatic repair kit Slime Smart Repair
Code: CRK305-INProduct detailed description
Fast and quality repair of the defect. Set with compressor for car igniter.
Slime is a smart way to deal with a flat tire. It can repair a defect in 10 minutes! Just inject the sealant into the punctured tube, inflate the tire and you're good to go.
The kit can be easily stored under the seat or in the trunk.
Slime is the safest and the most effective tyre sealant available on our market. Thanks to its low freezing point (-37° C) and high separation point (82° C), the sealant is effective even at extreme temperatures.
Slime is non-toxic, non-flammable and easy to remove with water. It is specially designed to have no corrosive effects - it is therefore safe for tyres and rims.
How does Slime work?
As a tyre repaired with Slime sealant rotates, centrifugal force pushes the sealant into the tyre tread, where it forms a protective layer and acts on the puncture.
Mass consumption - tubeless/ tubeless tyres
- Cyclo: 89 ml / 118 ml.
- Motorcycles, scooters: 237 to 473 ml / 237 ml.
- Dirt bike, MTB: 237 ml.
- Car: 473 ml / 237 ml.
- Vans, SUVs: 592 ml.
- Quads: 710 to 946 ml.
How to use Slime Smart Repair?
- The black cap on the bottle is used to insert the valve. Unscrew this attachment from the bottle and use it to remove the insert from the tyre valve.
- Connect the hose included in the package to both the bottle and the valve. Squeeze in the desired amount of sealant.
- Screw the valve insert back on.
- Connect the compressor hose to the valve and the cable to the car igniter. Inflate the tyre to the required pressure. Slowly roll or twist the tyre so that the mass reaches the puncture.
What does the Slime Smart Repair Kit contain?
- 1 x Slime sealant (473 ml)
- 1 x 12V air compressor with pressure gauge, for use in car igniter
- 1 x air hose
- 1 x valve insert removal attachment and Slime tyre filling hose
- 1 x set of adapters (for tyres, balls, air mattresses and other inflatable objects)
- 1 x instructions for use
Notice: Please read the instructions carefully before use! Slime sealant is not intended to treat tires that are leaking pressure from side punctures, slow punctures, damaged rims or bad valves.
Additional parameters
| Category: | Pneu a kola |
|---|---|
| Weight: | 2.5 kg |
| EAN: | 716281500282 |
| HOTAREK-XML: | 8 |

| Manufacturing company : | Slime (ITW Global Tire Repair) |
|---|---|
| Address : | 125 Venture Drive, Suite 210 San Luis Obispo, CA 93401 USA |
| E-mail : | info@slime.com |
