Mamut High Tack Glue (290ml, black)

Product detailed description

For instant bonding without the need to fix the joints - just press firmly.

Mamut Glue High Tack one-component MS polymer-based adhesive for instant bonding no need to fix the joint - just press firmly! With a bit of hyperbole, you could say that replaces nails and screws.

The joint is high-strength and elastic with a high initial adhesion strength of up to 500 kg/m2. The adhesive can be used at temperatures from 5 to 40°C. The drying time is 24 hours with a layer of 2-3 mm. Connect reliably withstands temperatures from -40 to 90 °C.

Connections holds immediately after gluing and do not require any fixation. The glue is effective on wet, absorbent and non-absorbent substrates. It is odourless, solvent-free, isocyanate-free, phthalate-free and silicone-free. Once cured, the joint is permanently flexible, heat resistant and repaintable with suitable paints.

ATTENTION! The glued flat must be clean, free of grease, dust and loose particles. The correct amount of adhesive must be applied in proportion to the area and weight to be bonded. The adhesive is not suitable for bonding PP, PE, PTFE, PMMA, asphalt and animal substrates.