Metabond ECO oil additive (250ml)

Product detailed description

Exclusive engine oil additive with ceramic nanoparticles.

Metabond ECO - metal surface finisher

Metabond ECO is a refiner for internal metal surfaces of passenger car internal combustion engines that use oils of the specification 10W-XX and thicker. (10W-30, 10W-40, 15W-30, etc.)

Contains ceramic nanoparticles (h-BN). After application of Metabond ECO, friction is significantly reduced and lubrication is improved. The refinement of the metal surfaces and the subsequent reduction of friction will significantly extend the life of the engine.

Metabond ECO does not contain chlorine, sulphur, phosphorus or PTFE (Teflon). It is fully filterable. It does not react with oil or change its properties. Does not cause corrosion of non-ferrous metals.

Benefits of using Metabond ECO engine additive

• Reduction of friction by up to 60%.
• Increase engine power by 5-10%.
• Extending engine life.
• Reduction of fuel consumption by 5 - 15%.
• Reduction of exhaust emissions.
• Significantly reduces engine wear during cold starts.

Instructions for use

• Heat the pack to approximately 30°C (for example in warm water or on a radiator).
• Shake thoroughly and add the contents of the pack to the engine oil. Metabond ECO is recommended to be added to new oil at regular oil changes. It can also be added to oil that has already been changed, but only up to a maximum of three thousand kilometres after the change.
• Metabond ECO is recommended to be added to heated oil.
• Then let the engine idle for 5-10 minutes.
• One 250 ml pack will treat 4-8l of engine oil. For engines with higher oil content, use two packs. Use only with the oil prescribed by the car manufacturer.